66gtk
04-02-2010, 02:34 PM
I saved the doors for last. Lot's of built up paint, runs, loss of grain pattern, etc. Decided to strip to bare metal and start over. pics below follow progression from start to finish. Fun times indeed.
http://www.customshowboards.com/fbinterior/doors/0007.jpg
http://www.customshowboards.com/fbinterior/doors/0010.jpg
after some paint stripper...
http://www.customshowboards.com/fbinterior/doors/0013.jpg
now after some wheel cleaning...
http://www.customshowboards.com/fbinterior/doors/0016.jpg
a dust coat of Krylon (directions say to paint over bare metal, so I used very light coats)
http://www.customshowboards.com/fbinterior/doors/0017.jpg
3-4 coats later...
http://www.customshowboards.com/fbinterior/doors/0018.jpg
detail of grain pattern intact again...
http://www.customshowboards.com/fbinterior/doors/0021.jpg
http://www.customshowboards.com/fbinterior/doors/0007.jpg
http://www.customshowboards.com/fbinterior/doors/0010.jpg
after some paint stripper...
http://www.customshowboards.com/fbinterior/doors/0013.jpg
now after some wheel cleaning...
http://www.customshowboards.com/fbinterior/doors/0016.jpg
a dust coat of Krylon (directions say to paint over bare metal, so I used very light coats)
http://www.customshowboards.com/fbinterior/doors/0017.jpg
3-4 coats later...
http://www.customshowboards.com/fbinterior/doors/0018.jpg
detail of grain pattern intact again...
http://www.customshowboards.com/fbinterior/doors/0021.jpg